KINOTON KOREA - Products

DSi 2.0 앰프는 하드웨어 요구 사항을 간소화하는 동시에 시스템을 보다 빠르고 쉽게 구축합니다. D-모델은 추가 처리 하드웨어 없이 Dolby ATMOS와 직접 인터페이스합니다. 모든 DSi 2.0 암페어에는 네트워크 오디오 배포, 몰입형 설치 및 타사 극장 관리 및 영화관 제어 시스템과의 직접 인터페이스용 SNMP 연결이 있습니다. 전력 투자와 미래 대비 시스템을 최대한 활용하고자 하는 영화관 관리자와 통합자는 DSi 2.0 시리즈를 통해 실용적이고 비용 효율적인 패키지를 경험 할 수 있습니다.

Each amp offers 4 channels with bridgeable outputs to easily power JBL’s entire line of cinema speakers
Amplifiers are engineered to meet exact power requirements of JBL cinema speakers, for a single JBL cinema solution
A new amplifier design allows for high power output at 2Ω (SA and MA models), enabling up to 4 surround speakers to be powered by a single channel
D-models interface with Dolby Atmos directly, without the need for additional processing hardware. (Future firmware update required)
Three power ratings are available
-SA4/SA4-D (4 channels): 350W (8Ω)/600 (4Ω)/900W (2Ω)/1,100W (8Ω bridged)/1,800W (4Ω bridged)
-MA4/MA4-D (4 channels): 700W (8Ω)/1,200W (4Ω)/1,900W (2Ω)/2,400W (8Ω bridged)/3,800W (4Ω bridged)
-LA4/LA4-D (4 channels): 1,200W (8Ω)/2,000W (4Ω)/1,000W (2Ω)/4,000W (8Ω bridged)/2,000W (4Ω bridged)
All models feature SNMP and ethernet connectivity for networking and third-party control; SA4-D, MA4-D and LA4-D models add Dante/AES67 connectivity. (Future firmware update required)
All models include a HiQ port to interface with HARMAN Audio Architect control software over a standard TCP/IQ network
Best-in-class, 96kHz/32-bit floating-point processing incorporates FIR filtering, LevelMAX™ limiting, 8-channel parametric EQ, delay settings and more
Crown DriveCore technology replaces hundreds of amplifier parts with a single chip, for superior efficiency and reliability
Built-in JBL Cinema Speaker presets match all JBL cinema loudspeakers; amps are power-matched with JBL cinema speakers for optimal performance and fast system configuration
Recall presets, mute channels, monitor amplifier health and power on and off through a combined GPIO/AUX port
SNMP connectivity allows direct interfacing with third-party theater-management and cinema-control systems
An intuitive front-panel LCD and encoder interface let you configure amplifier settings at the push of a button
Ultra-quiet operation: 51dBA maximum fan noise
All models are standard 19-inch (482mm) 2RU rackmount units
Weight: 23.2 pounds (10.5 kg)
Frequency response: 20 Hz–20 kHz
THD: 0.35%
Power supply: 100–220V +/- 10%, 50/60 Hz
Power connector: Standard IEC type, 320 inlet for detachable connector, 100–240V
Accommodates 10AWG wire

※ The specification of the product is as per the initially registered information and subject to change without notice.

Download

Download

JBLDSi2.0_SpecSheet.pdf

Address: Kinoton Building, 12, Yangjaecheon-ro 3-gil, Seocho-gu, Seoul(Yangjae-dong, 116-9)

Phone: +82-2-6923-1900 / +82-1661-4741 Fax : +82-2-518-1921
Cinema : 02-6923-1990[Product inquiry] / Cinema : 1661-4741[A/S] / LED DID : +82-1661-9568[Product inquiry and customer service] / Pro Audio : +82-2-6923-1964~5[Product inquiry] / audio pro : +82-1661-9569[A/S]

Email : Video Business Deaprtment-biz@kinoton.co.kr, Digital Media Business Department-digitalservice@kinoton.co.kr, Audio Business Department-audio@kinoton.co.kr, Administrations-account2@kinoton.co.kr, Cinema Technical Support-service@kinoton.co.kr